What Are The Characteristics Of Different Types Of Sewage Lift Pumps
Leave a message
When it comes to sewage lifting pump, I believe many people have some understanding of it. It is suitable for chemical, petroleum, mining and other industrial sewage, in addition, urban sewage treatment plant drainage system and other industries conveyor belt particles of sewage, sewage can also be discharged through sewage lifting pump. So what are the basic types and characteristics of sewage lift pumps?
The basic types of sewage lift pumps are mainly divided into the following three categories:
1. Horizontal sewage lift pump
The installation accuracy of horizontal sewage lifting pump is lower than that of vertical sewage lifting pump, and it is also easy to maintain, but generally before starting, the exhaust water should be filled with water, and the pump room is required to have a larger plane size, which is suitable for occasions where the water level is not variable.
2. Vertical sewage lift pump
Vertical sewage lifting pump requires that the plane size of the pump room is small, the pump impeller is immersed in the water, easy to start, the motor is installed in the upper layer, which is conducive to heat dissipation, lighting, moisture-proof, ventilation, suitable for the occasion of the water level variation is large.
3. Submersible sewage lift pump
It is a pump and motor connected, and at the same time submersible pump products, it is simple in structure, easy to use. It is worth mentioning that compared with the general horizontal pump or vertical sewage lift pump, the submersible sewage pump obviously has the following advantages: its structure is relatively compact, covers a small area, so there is no need to build a special pump room to install the pump and motor, can save land and infrastructure costs. In addition, its installation and maintenance is also very convenient. In most cases, the continuous operation time of the equipment is long. Because the pump and motor are coaxial, the shaft is short and the rotating parts are light in weight, so the load on the bearing is relatively small.
