How To Choose The Drainage Sewage Treatment Hoist

Sometimes the sewage elevator is ringing all the time. At this time, it is not actually a bearing problem, there is no need to remove the bearing. At this time generally to exclude three main conditions: sewage elevator cutting knife is stuck; Second, the pump in the sewage elevator is cavitation; Third, the internal motor is burned out. The solution is to open the sewage lifting box, remove the impurities stuck on the cutting knife, clean up; If it is cavitation, it is necessary to check the ventilation hole of the sewage hoist, keep the air flow in the ventilation hole, and remove the activated carbon to dry. The motor burn out situation is more complex, at this time need to find the equipment manufacturer for after-sales maintenance.

Air floating dissolution method. The method to achieve oil-water separation is to separate bubbles from saturated oil-bearing sewage, add oil-bearing sewage and air into the dissolving tank, gradually pressurize the air to dissolve in the sewage, the dissolution time is about 4 minutes, and then transfer the sewage to the floating tank. When the air is suddenly decompressed, many tiny bubbles appear. The bubbles float with the oil particles.

To sum up, the integrated sewage elevator has the advantages mentioned above. First, the comprehensive sewage elevator is very convenient to use and can meet the needs of most consumers. Secondly, the equipment can operate normally in different places. In addition, the equipment has a high degree of intelligence, which can run automatically when used, and it is safer to use the alarm mode.